- 8th Conference Nano & Macro Mechanics 2017
Bittnar, P. org. - Padevět, P. org. - Plachý, T. org. - Tesárek, P. org. - Plaček Otcovská, T. org. - Mužíková, B. org., - Prošek, Z. org.
[Conference Hosting] 2017.
2017
- Micronized recycled concrete as an alternative binder/active filler for stabilized and cold recycled mixtures
Čížková, Z. - Šedina, J. - Valentin, J. - Tesárek, P., - Karra´a, G.
In: IRF Middle East & North Africa Regional Congress & Exhibition - Technical & Scientific Papers. Paris: IRF (International Road Federation), 2017. p. 620-630.
2017
- CATHIONIC CORROSION INHIBITORS FOR PROTECTION OF STEEL IN CHLORIDE CONTAMINATED CONCRETE
Lovasi, T. - Msallamova, S. - Kouril, M. - Jamborova, T. - Stoulil, J. - Němeček, J., - Šulc, R.
In: METAL 2017 Conference Proceedings. Ostrava: Tanger Ltd., 2017. p. 1361-1366. 1st Edition. ISBN 978-80-87294-79-6.
2017
- Modely pro hodnocení rizika poruch vlivem interakce dopravních a okolních staveb
Šejnoha, J. - Janda, T.
[Software] 2017.
2017
- Thermo-mechanical simulations of early-age concrete cracking with durability predictions
Havlásek, P. - Šmilauer, V. - Jandová, K., - Baquerizo, L.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. p. 1-7. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-899X.
2017
- Dry Separation of Brown Coal Fly Ash, Determination of Properties of Separated Parts, and Their Application in High Volume Cementitious Pastes
Haider, U. - Bittnar, Z. - Ali, A. - Kopecký, L. - Šmilauer, V. - Bittnar, P., - Pokorný, J.
Periodica Polytechnica-Civil Engineering. 2017, 61(3), 590-601. ISSN 0553-6626.
2017
- Analysis of Tensile Strength in Bending of Plasterboard with Use of Optical Correlation
Zobal, O. - Litoš, J., - Antoš, J.
In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 459-463. ISBN 978-80-553-3167-6.
2017
- Modeling thermomechanical damage mechanisms of concrete
Pohl, C. - Unger, J.F.
In: Coupled Problems in Science and Engineering VII. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017. ISBN 978-84-946909-2-1.
2017
- Obtaining macroscopic properties from a mesoscale thermomechanical model of concrete
Pohl, C. - Unger, J.F.
In: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM) ; 11 - 13 October 2017, Stuttgart, Germany. Stuttgart: Universitaet Stuttgart, 2017.
2017
- Experimental and numerical analysis of tensile properties of textile reinforced concrete with steel fibres
Machovec, J. - Vogel, F. - Linforth, S., - Konvalinka, P.
In: Key Engineering Materials. Durnten-Zurich: Trans Tech Publications Ltd, 2017. p. 275-280. ISSN 1013-9826. ISBN 9783035710793.
2017
- The Occurrence of Synchronized Jumping Crowd at Sports Stadiums
Verner, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 152-156. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Wang Tiles Local Tilings Created by Merging Edge-compatible Finite Element Meshes
Zrůbek, L. - Kučerová, A., - Doškář, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 162-165. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Micromechanical quantities based on Wang tiles with local tilings
Zrůbek, L. - Kučerová, A., - Doškář, M.
In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. p. 159-160. ISBN 978-80-261-0748-4.
2017
- DRYING CHARACTERISTIC OF RAMMED EARTH WITH ILLITIC-KAOLINITIC CLAY CONTENT
Otcovská, T. - Mužíková, B., - Padevět, P.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 89-92. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- PORUCHY STAVEB Z NEPÁLENÉ HLÍNY PŘI ZVÝŠENÉ HLADINĚ VODY A LABORATORNÍ TESTOVÁNÍ ODOLNOSTI NEPÁLENÉ HLÍNY VE VODĚ
Mužíková, B. - Otcovská, T., - Padevět, P.
In: Proceedings of 15th International Conference on New Trends in Statics and Dynamics of Buildings. Bratislava: Slovak University of Technology in Bratislava, 2017. p. 9-14. ISBN 978-80-227-4732-5.
2017
- Využití povrchově modifikovaných polymerních a skleněných mikro-vláken jako výztuž v cementových kompozitních materiálech
Trejbal, J. - Prošek, Z. - Fládr, J., - Tesárek, P.
In: 14. konference Speciální betony 2017. Praha: Sekurkon, 2017. p. 11-17. ISBN 978-80-86604-73-2.
2017
- Modeling Chloride Migration in Reinforced Concrete
Němeček, J. - Kruis, J. - Koudelka, T., - Němečková, J.
In: ICCES 2017 International Conference on Computational & Experimental Engineering and Science. Coimbra: ITeCons - Institute for Research and Technological Dev. in Construction Sciences, 2017. p. 1-6.
2017
- Microstructure and Micromechanical Properties of Mg Microtubes Prepared by Laser Dieless Drawing
Jäger, A. - Tesař, K. - Němeček, J. - Minenin, A., - Němeček, J.
In: Book of Abstracts - LMP 2017. Košice: IMR SAS, 2017. pp. 24-25.
2017
- Fracture Properties of Cement Studied by Nanoindentation and FIB
Němeček, J. - Němeček, J., - Maňák, J.
In: Book of Abstracts - LMP 2017. Košice: IMR SAS, 2017. pp. 10.
2017
- VARIATIONALLY-BASED EFFECTIVE DYNAMIC THICKNESS FOR LAMINATED GLASS BEAMS
Schmidt, J. - Zemanová, A. - Janda, T. - Zeman, J., - Šejnoha, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 109-114. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Suchá prefabrikovaná směs multifunkčního silikátového kompozitu
Kolář, K. - Bažantová, Z., - Konvalinka, P.
Czechia. Patent CZ 306663. 2017-03-15.
2017
- Interfacial shear strength enhancement of polymeric macro-fibers via plasma treatment
Prošek, Z. - Trejbal, J. - Tesárek, P., - Kopecký, L.
Advanced Materials Proceedings. 2017, 2(12), 789-792. ISSN 2002-4428.
2017
- Methodology for Measuring the Shear Stress of Plasterboards
Zobal, O. - Jára, R., - Hataj, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 157-161. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Evaluation of Micromechanical Properties of Carbon Fiber Fabric Using Nanoindetation
Klapálek, P. - Prošek, Z. - Jíra, A., - Melzerová, L.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 66-70. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Flutter and galloping of cable-supported bridges with porous wind barriers
Buljac, A. - Kozmar, H. - Pospíšil, S., - Macháček, M.
Journal of Wind Engineering and Industrial Aerodynamics. 2017, 2017(171), 304-318. ISSN 0167-6105.
2017
- NUMERICAL ANALYSIS OF RURAL TIMBER FRAMED MASONRY INFLUERNCED BY SHALLOW FOUNDATION
Ramesh, M. - Kuklík, P., - Hlavatá, V.
In: Proceedings of the 3rd International Conference on Protection of Historical Constructions PROHITECH´17. Lisboa: IST Press, 2017. ISBN 978-989-8481-58-0.
2017
- The Influence of Microfibril Angle on the Wood Stiffness Parameters
Vaněrek, J. - Martínek, R. - Čada, P., - Kuklík, P.
In: Procedia Engineering. Kidlington Oxford OX GB: Elsevier, 2017. p. 259-264. vol. 195. ISSN 1877-7058.
2017
- Several comments on numerical modeling of shallow foundations
Ramesh, M. - Kuklík, P., - Válek, M.
In: Procedia Engineering. Kidlington Oxford OX GB: Elsevier, 2017. p. 73-80. vol. 195. ISSN 1877-7058.
2017
- Multiscale hierarchical modeling of concrete
Šmilauer, V.
Defense date 2018-04-04. Doctoral Thesis. CTU FCE. Department of Mechanics.
2017
- Additive manufacturing of tiles with functionally oriented geometry
Novák, J. - Tyburec, M. - Somr, M., - Janda, T.
[Verified Technology] 2017.
2017
- Comparison of Creep of the Cement Pastes Included Fly Ash
Padevět, P. - Bittnar, P.
In: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. Les Ulis Cedex A: EDP Sciences, 2017. ISSN 2261-236X.
2017
- Creep of Unfired Clay Mortar Based on Illitic Clay
Padevět, P. - Bittnar, P.
In: EAN 2017 - 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 472-476. ISBN 9788055331676.
2017
- Pasportizace stavu CB desky, posouzení návrhu opravy, úsek D5, km 150,700 – 144,600
Mondschein, P. - Kopecký, L.
[Research Report] Praha: CTU FCE. Department of Road Structures, 2017. Report no. ZP/136002/2017.
2017
- Vliv hydraulických gradientů a kolísání hladiny podzemních vod na stabilitu staveb
Kuklík, P. - Brouček, M.
Zpravodaj ČSVTS. 2017, 2017(43), 48-51.
2017
- Random Heterogeneous Materials: Wang Tile Size vs Circular Particle Packing
Šedlbauer, D.
In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. pp. 127-128. ISBN 978-80-261-0748-4.
2017
- Dynamic response of footbridges with tuned mass dampers
Máca, J.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
2017
- The dynamic behavior of the extremely skew railway bridge “Oskar“
Ryjáček, P. - Polák, M. - Plachý, T., - Kašpárek, J.
In: 2nd International Conference on Structural Integrity, ICSI 2017, 4-7 September 2017, Funchal, Madeira, Portugal. Amsterdam: Elsevier B.V., 2017. p. 1051-1056. Procedia Structural Integrity. vol. 5. ISSN 2452-3216.
2017
- DIFFERENT VIEWS ON ADDITIONAL RANDOM PARAMETERS IN EXPERIMENT DESIGN FOR THERMOPHYSICAL PARAMETERS ESTIMATION
Jarušková, D. - Kučerová, A.
In: UNCECOMP 2017. National Technical University of Athens, 2017. p. 543-553. 1. ISBN 978-618-82844-4-9.
2017
- 複数微細ひび割れ型繊維補強セメント複合材料
Kanda, T. - Sakata, N. - Hayashi, D. - Hashimoto, M. - Nagai, K. - Suryanto, B. - Maekawa, K., - Kabele, P.
Japan. Patent JP 6214393 B2. 2017-10-18.
2017
- Chemical processes
Schlangen, E. - van Zijl, G., - Kabele, P.
In: A Framework for Durability Design with Strain-Hardening Cement-Based Composites. Dordrecht: Springer Science+Business Media B.V., 2017. p. 79-100. RILEM State-of-the-Art Reports. vol. 22. ISSN 2213-204X. ISBN 978-94-024-1012-9.
2017
- Strain-Hardening Cement-Based Composites
Mechtcherine, V. ed. - Slowik, V. ed., - Kabele, P. ed.
Dresden, 2017-09-18/2017-09-20. Dordrecht: Springer Science+Business Media B.V., 2017. RILEM Bookseries. ISSN 2211-0844. ISBN 978-94-024-1193-5.
2017
- A Dynamic Analysis of the Cable-Stayed Footbridge in Čelákovice Town
Šána, V. - Polák, M., - Plachý, T.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2877-2882. vol. 199. ISSN 1877-7058.
2017
- Free vibration analysis of laminated glass beams using dynamic effective thickness and other approaches
Zemanová, A. - Zeman, J. - Janda, T., - Šejnoha, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1122-1125. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Challenges of Finite Element Discretization of Wang Cubes
Rypl, D. - Doškář, M.
In: Proceedings of the 22nd International Conference on Computer Methods in Mechanics. Lublin: Lublin University of Technology, 2017. ISBN 978-83-7947-264-2.
2017
- Metodika pro moderní metodu měření osových sil v prvcích stavebních konstrukcí
Klier, T. - Míčka, T. - Junek, V. - Polák, M. - Plachý, T. - Šimler, M., - Smeták, T.
[Other Methodology (not meeting RIV conditions)] 2017.
2017
- Verifikace a aplikace in situ moderní metody pro měření osových sil v prvcích stavebních konstrukcí
Klier, T. - Míčka, T. - Polák, M. - Šimler, M., - Smeták, T.
In: Sanace 2017 - sborník recenzovaných přednášek. Brno: Sdružení pro sanace betonových konstrukcí, 2017. p. 71-80. ISBN 978-80-214-5499-6.
2017
- Moderní metoda pro měření osových sil v prvcích stavebních konstrukcí
Klier, T. - Míčka, T. - Polák, M. - Šimler, M., - Smeták, T.
In: Sborník příspěvků 22. mezinárodní sympozium MOSTY/BRIDGES 2017. Brno: Sekurkon, 2017. p. 197-202. ISBN 978-80-86604-71-8.
2017
- FICTITIOUS DOMAIN METHOD FOR NUMERICAL SIMULATION OF INCOMPRESSIBLE VISCOUS FLOW AROUND RIGID BODIES
Beňo, M. - Patzák, B.
Acta Polytechnica. 2017, 57(4), 245-251. ISSN 1210-2709.
2017
- Balisticky odolná lehká bariéra
Fornůsek, J. - Sovják, R. - Mára, M. - Zatloukal, J., - Konvalinka, P.
[Prototype] 2017.
2017
- Zábradelní panely z UHPC pro rekonstrukci mostu v městě Sázava
Tichý, J. - Ryjáček, P. - Šmilauer, V. - Slánský, B.Jr., - Ševčík, S.
In: 24. Betonářské dny 2017 - Sborník příspěvků. Praha: ČBS - Česká betonářská společnost ČSSI, 2017. p. 1-11. ISBN 978-80-906759-0-2.
2017
- WATER ABSORPTION CAPACITY COEFFICIENT AND MASS MOISTURE OF RAMMED EARTH MATERIAL
Mužíková, B. - Otcovská, T., - Padevět, P.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 85-88. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Dřík dentálního implantátu
Jíra, A. - Denk, F., - Denk, F.
Czechia. Patent CZ 307126. 2017-12-13.
2017
- Trabekulární struktura 1
Řehounek, L. - Jíra, A., - Čejka, Z.
[Functional Sample] 2017.
2017
- Modelling of Synchronized Jumping Crowds on Grandstands
Máca, J. - Rokoš, O.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 645-652. vol. 190. ISSN 1877-7058.
2017
- On Random Spatial Distribution of Active Crowds on Grandstands and Their Effects on Dynamic Response
Máca, J. - Rokoš, O.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2838-2843. vol. 199. ISSN 1877-7058.
2017
- Synthesized Enrichment Functions for Extended Finite Element Analyses with Fully Resolved Microstructure
Doškář, M. - Novák, J., - Zeman, J.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 29-34. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- MEFEL 2017
Kruis, J. - Koudelka, T.
[Software] 2017.
2017
- METR 2017
Koudelka, T. - Krejčí, T.
[Software] 2017.
2017
- GEFEL2017
Kruis, J. - Koudelka, T.
[Software] 2017.
2017
- Two-scale framework for coupled problems
Koudelka, T. - Krejčí, T.
In: International Conference of Computational Methods in Sciences and Engineering 2017, ICCMSE 2017. New York: AIP Conference Proceedings, 2017. vol. 1906. ISBN 9780735415966.
2017
- Processor farming in two-level analysis of historical bridge
Krejčí, T. - Kruis, J. - Koudelka, T., - Šejnoha, M.
In: International Conference of Computational Methods in Sciences and Engineering 2017, ICCMSE 2017. New York: AIP Conference Proceedings, 2017. vol. 1906. ISBN 9780735415966.
2017
- Processor Farming Method for Multi-Scale Analysis of Masonry Structures
Krejčí, T. - Koudelka, T.
In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
2017
- Analysis of Coupled Heat and Moisture Transport on Parallel Computers
Koudelka, T. - Krejčí, T.
In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
2017
- Wang Tile Size in Terms of Circular Particle Dynamics
Šedlbauer, D.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 102-108. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Hierarchical stochastic model of terrain subsidence during tunnel excavation
Janda, T. - Šejnoha, M., - Šejnoha, J.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
2017
- Calibration of model for laminated glass polymer interlayer based on rheometer data
Schmidt, J. - Janda, T., - Šejnoha, M.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 1-7. ISBN 978-80-553-3167-6.
2017
- EXPERIMENTAL DETERMINATION OF VISCO-ELASIC PROPERTIES OF LAMINATED GLASS INTERLAYER
Schmidt, J. - Janda, T. - Šejnoha, M., - Valentin, J.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 850-853. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- PARALLEL APPROACH TO SOLVE OF THE DIRECT SOLUTION OF LARGE SPARSE SYSTEMS OF LINEAR EQUATIONS
Bošanský, M. - Patzák, B.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 50-53. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Pedestrian load models of footbridges
Máca, J. - Štěpánek, J.
In: Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2017. Les Ulis Cedex A: EDP Sciences, 2017. ISSN 2261-236X.
2017
- Digital image analysis for assessment of contact angles and stiffness of fiber reinforcement
Nežerka, V. - Hlůžek, R., - Trejbal, J.
In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 10-12. ISBN 978-93-87405-61-5.
2017
- Microanalysis of Interfacial Tranzition Zone between Surface Modified Polymeric Fibers and Cement Matrix
Prošek, Z. - Rácová, Z. - Trejbal, J., - Hrbek, V.
In: Nanotech / Biotech / Surtech Middle East 2017. Dubai: Science, Engineering, Technology Conferences Organisers, 2017.
2017
- Plasma treatment impact on physical and chemical properties of polymeric fibers
Hlůžek, R. - Prošek, Z. - Trejbal, J. - Fládr, J., - Potocký, Š.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 49-54. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Performance of cement composites reinforced with surface-modified polypropylene micro- and macro-fibers
Antoš, J. - Dejdar, L. - Trejbal, J., - Prošek, Z.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 11-15. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Pullout behavior of oxygen plasma treated polymer fibers from cement matrix
Trejbal, J. - Horová, T., - Prošek, Z.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 130-134. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- HYDRATION PROCESS AND MECHANICAL PROPERTIES OF CEMENT PASTE WITH RECYCLED CONCRETE POWDER AND SILICA SAND POWDER
Topič, J. - Prošek, Z.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 125-129. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Influence of Distribution of Finger Joints and Timber Flaws on the Damage Evolution of Laminated Glued Timber Beams
Melzerová, L. - Šejnoha, M.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 280-285. ISBN 978-80-553-3167-6.
2017
- Ověření chování skloviny pru určení lomové houževnatosti
Hájková, P. - Jíra, A.
In: Biomateriály a jejich povrchy X.. Praha: Czech Technical University in Prague, 2017. p. 52. ISBN 978-80-01-06195-4.
2017
- Combining Homogenization, Indentation and Bayesian Inference in Estimating the Microfibril Angle of Spruce
Šejnoha, M. - Janda, T. - Vorel, J. - Kucíková, L., - Padevět, P.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 310-317. vol. 190. ISSN 1877-7058.
2017
- ADAPTIVE QUASICONTINUUM SIMULATION OF ELASTIC-BRITTLE DISORDERED LATTICES
Mikeš, K. - Jirásek, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 80-84. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- GEOMETRICAL OPTIMIZATION OF DENTAL IMPLANTS WITH REGARD TO OSSEOINTEGRATION
Řehounek, L. - Denk, F., - Jíra, A.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 97-101. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Výzkumná zpráva o vyhodnocení podélných odporů monitoringu
Kašpárek, J. - Stančík, V. - Ryjáček, P. - Polák, M., - Rotter, T.
[Research Report] 2017.
2017
- Numerical benchmark campaign of COST Action TU1404 – microstructural modelling
Wyrzykowski, M. - Sanahuja, J. - Charpin, L. - Šmilauer, V., - Hájková, K.
RILEM Technical Letters. 2017, 2(1), 99-107. ISSN 2518-0231.
2017
- MICRO-MECHANICAL PERFORMANCE OF CONCRETE USED AS RECYCLED RAW MATERIAL IN CEMENTITIOUS COMPOSITE
Hrbek, V. - Koudelková, V. - Prošek, Z., - Tesárek, P.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 55-60. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- EVALUATION OF EFFECTIVE PROPERTIES OF BASALT TEXTILE REINFORCED CERAMIC MATRIX COMPOSITES
Valentová, S. - Hrbek, V., - Šejnoha, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 142-147. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- USING HOMOGENIZATION AND NANOINDENTATION FOR MICROFIBRIL ANGLE DETERMINATION OF SPRUCE
Kucíková, L. - Hrbek, V. - Vorel, J., - Šejnoha, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 71-74. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Three-dimensional isogeometric curved beam element with locking treatment and its computational performance
Dvořáková, E. - Patzák, B.
In: Proceedings of V International Conference on Isogeometric Analysis. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017.
2017
- On development of the interactive design tool based on Isogeometric analysis
Dvořáková, E. - Patzák, B.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 39-42. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Výzkumná zpráva popisující postup prací a dosažené výsledky za rok 2017
Ryjáček, P. - Rotter, T. - Kašpárek, J. - Polák, M. - Plachý, T. - Valentin, J., - Fišer, M.
[Research Report] 2017.
2017
- TIME DEPENDENCE OF BONDING CAPACITY OF PLASMA-TREATED POLYMER FIBERS
Trejbal, J. - Somr, M., - Antoš, J.
In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 13-16. ISBN 978-93-87405-61-5.
2017
- IMPACT OF SURFACE PLASMA TREATMENT ON THE PERFORMANCE OF PET SCATTERED FIBER REINFORCEMENT
Antoš, J. - Trejbal, J.
In: PROCEEDINGS OF ISER 94th INTERNATIONAL CONFERENCE. IRAJ, 2017. p. 17-20. ISBN 978-93-87405-61-5.
2017
- Coupled Simulation for Fire-Exposed Structures using CFD and Thermo-Mechanical Models
Šulc, S. - Šmilauer, V., - Wald, F.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Long-Time Investigation of Cement Composite Material with Micronized Waste Marble Powder: Dynamic Modules
Prošek, Z. - Topič, J.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 93-96. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- THE EFFECT OF PLASTICIZER ON MECHANICAL PROPERTIES OF THE CEMENT PASTE WITH FINE GROUND RECYCLED CONCRETE
Hrůza, J. - Prošek, Z.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 61-65. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Foamed Cement Composites: Detection of the Modulus of Elasticity Using Dic Analysis and Comparison with Other Methods
Ďureje, J. - Prošek, Z.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 35-38. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- MuPIF, ver. 2.0
Patzák, B. - Šmilauer, V., - Horák, M.
[Software] 2017.
2017
- OOFEM, ver. 2.5
Patzák, B. - Jirásek, M. - Šmilauer, V. - Horák, M. - Havlásek, P. - Dvořáková, E. - Kolařík, F. - Mikeš, K., - Ohman, M.
[Software] 2017.
2017
- Modeling Adhesive Anchors in a Discrete Element Framework
Marcon, M. - Vorel, J. - Nincevic, K., - Wan-Wendner, R.
Materials. 2017, 10(8), ISSN 1996-1944.
2017
- EFFECTIVE HEAT AND MOISTURE TRANSPORT PROPERTIES OF SPRUCE
Kucíková, L. - Vorel, J. - Sýkora, J., - Šejnoha, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 550-553. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- BACK ANALYSIS FOR DETERMINATION OF TENSION-SOFTENING DIAGRAM
Vorel, J. - Kabele, P.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1042-1045. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- The complex approach to optimization of composite bridges
Žitný, J. - Ryjáček, P., - Lepš, M.
In: Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure. Londýn: Taylor & Francis Group, 2017. p. 1881-1890. ISBN 978-1-138-02847-0.
2017
- OPTIMIZATION-BASED APPROACH TO TILING OF FINITE AREAS WITH ARBITRARY SETS OF WANG TILES
Tyburec, M. - Zeman, J.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 135-141. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- COMPARISON OF FAILURE CRITERIA FOR WOOD IN TENSILE-SHEAR STRESS STATE
Šmídová, E. - Kabele, P.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 115-120. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- NMM 2017 - Nano & Macro Mechanics 2017
Padevět, P. ed.
Praha, 2017-09-21. Praha: Czech Technical University in Prague, 2017. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Overview of Ensemble of Surrogates
Myšáková, E.
In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
2017
- Comparison of Methods Used for Seismic Analysis of Structures
Čada, P. - Máca, J.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 20-28. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Modeling glulams in linear range with parameters updated using Bayesian inference
Šejnoha, M. - Janda, T. - Melzerová, L. - Nežerka, V., - Šejnoha, J.
Engineering Structures. 2017, 138 293-307. ISSN 0141-0296.
2017
- Rehabilitation of Reinforced Concrete by Electrochemical chloride extraction and Nanoparticle Injection
Němeček, J.
[Invited unpublished scientific lecture] University of California San Diego: UCSD. 2017-03-10.
2017
- Electrokinetic nanoparticle injection for remediating leaks in oil well cement
Němeček, J. - Li, L., - Xi, Y.
Construction and Building Materials. 2017, 156 63-72. ISSN 0950-0618.
2017
- Static and dynamic responses of a novel Al nanocomposite foam/sandwich structure under bending, impact and quasi-static compression tests
Hosseini, S.M. - Habibolahzadeh, A., - Němeček, J.
Journal of Sandwich Structures and Materials. 2017, 2017 1-22. ISSN 1099-6362.
2017
- Deformation of a prestressed liquid lens membrane
Pokorný, P. - Šmejkal, F. - Kulmon, P. - Novák, P. - Novák, J. - Mikš, A. - Horák, M., - Jirásek, M.
Applied Optics. 2017, 56(34), 9368-9376. ISSN 1559-128X.
2017
- Způsob měření délkových změn stavebních materiálů v modelových extrémních podmínkách a zařízení k provádění tohoto způsobu
Hadraba, D. - Sovják, R. - Hošek, J. - Černý, R. - Vejmelková, E., - Konvalinka, P.
Czechia. Patent CZ 307020. 2017-10-04.
2017
- Optimal shape of truss structures supporting protective walls
Procházka, P. - Válek, M.
In: Safety and Security Engineering VII. Wessex: WIT PRESS, 2017. p. 108-120. ISBN 978-1-78466-211-0.
2017
- Modeling the impacts of explosion in enclosed spaces using discontinuous boundary element and finite volume methods
Procházka, P. - Pešková, Š.
In: Boundary Elements and other Mesh Reduction Methods XXXX. Southampton: Witpress, 2017. p. 96-108. ISBN 978-1-78466-227-1.
2017
- Sensitivity Analysis of Laser Drawing Process of Mg tubes
Janouchová, E. - Lepš, M.
In: 33rd conference with international participation Computational Mechanics 2017 - Extended Abstracts. Pilsen: University of West Bohemia, 2017. ISBN 978-80-261-0748-4.
2017
- CONSTRUCTION OF RANDOM FIELD BASED ON IMAGE ANALYSIS
Sýkora, J. - Kučerová, A., - Zeman, J.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 958-961. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Comparison of viscoelastic finite element models for laminated glass beams
Zemanová, A. - Zeman, J., - Šejnoha, M.
International Journal of Mechanical Sciences. 2017, 131 380-395. ISSN 0020-7403.
2017
- Hydrophonic and Biocidal Properties of Electrospun SiO2 Nanofibers
Tichá, P. - Rácová, Z. - Sveshnikov, A. - Trejbal, J. - Baudys, M., - Demo, P.
In: NANOCON 2017 ABSTRACTS. Ostrava: TANGER, 2017. ISBN 978-80-87294-78-9.
2017
- Processor farming in two-level analysis of historical bridge
Krejčí, T. - Kruis, J. - Koudelka, T., - Šejnoha, M.
In: Proceedings of the Fifth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Stirling: Civil-Comp Press Ltd, 2017. ISSN 1759-3433. ISBN 978-1-905088-66-9.
2017
- Hybrid parallel approach to homogenization of transport processes in masonry
Krejčí, T. - Kruis, J. - Šejnoha, M., - Koudelka, T.
Advances in Engineering Software. 2017, 113 25-33. ISSN 0965-9978.
2017
- Coupled Hydro-Mechanical Model for Expansive Clays
Koudelka, T. - Krejčí, T., - Kruis, J.
In: Proceedings of International Conference on Numerical Analysis and Applied Mathematics 2016 (ICNAAM-2016). New York: AIP Conference Proceedings, 2017. AIP Conference Proceedings. vol. 1863. ISSN 0094-243X. ISBN 978-0-7354-1538-6.
2017
- MODELING OF CHLORIDE MIGRATION IN CONCRETE
Němeček, J. - Kruis, J., - Koudelka, T.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 710-713. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- NUMERICAL MODELLING OF EXPANSIVE CLAYS
Koudelka, T. - Krejčí, T., - Kruis, J.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 502-505. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Numerical analysis of coupled heat and moisture transport in masonry
Krejčí, T. - Kruis, J. - Šejnoha, M., - Koudelka, T.
Computers and Mathematics with Applications. 2017, 74(1), 229-248. ISSN 0898-1221.
2017
- Influence of alloying element Zn on the microstructural, mechanical and corrosion properties of binary Mg-Zn alloys after severe plastic deformation
Němec, M. - Jäger, A. - Tesař, K., - Gärtnerová, V.
Materials Characterization. 2017, 2017(134), 69-75. ISSN 1044-5803.
2017
- An Additively Manufactured Modular Metamaterial Composed of a Single Cell
Nežerka, V. - Somr, M. - Janda, T. - Doškář, M. - Zeman, J., - Novák, J.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 325-330. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- The Response of a SDOF System Driven by a Periodic Random Force
Šána, V. - Rokoš, O., - Máca, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 153-158. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Influence of Stationary Vehicles on Bridge Aerodynamic and Aeroelastic Coefficients
Kozmar, H - Buljac, A - Pospíšil, S - Macháček, M. - Král, R, - Kuznětsov, S
Journal of Bridge Engineering. 2017, 4(22), ISSN 1084-0702.
2017
- Aerodynamic and aeroelastic characteristics of typical bridge decks equipped with wind barriers at the windward bridge-deck edge
Buljac, A. - Kozmar, H. - Pospíšil, S., - Macháček, M.
Engineering Structures. 2017, 2017(137), 310-322. ISSN 0141-0296.
2017
- Calculation of Shell Structures by Using Layered Model
Fiedler, J. - Koudelka, T.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 306-309. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- ON PARALLELIZATION OF LINEAR SYSTEM EQUATION SOLVER IN FINITE ELEMENT SOFTWARE
Bošanský, M. - Patzák, B.
In: Proceedings of Engineering Mechanics 2017. Brno: Brno University of Technology, 2017. p. 198-201. ISSN 1805-8248. ISBN 9788021454972.
2017
- Micromechanical performance of interfacial transition zone in fiber-reinforced cement matrix
Zacharda, V. - Němeček, J., - Štemberk, P.
In: Fibre Concrete 2017. Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 246. ISSN 1757-899X.
2017
- Study on time-dependent surface properties of plasma treated polymer micro-fibers
Trejbal, J. - Valentová, T. - Potocký, Š. - Prošek, Z., - Tesárek, P.
In: European Advanced Materials Congress. Linkoping: VBRI Press AB, 2017. ISBN 978-91-88252-06-7.
2017
- Interfacial shear strength enhancement of polymeric macro-fibers via plasma treatment
Prošek, Z. - Trejbal, J. - Tesárek, P. - Kopecký, L., - Potocký, Š.
In: European Advanced Materials Congress. Linkoping: VBRI Press AB, 2017. ISBN 978-91-88252-06-7.
2017
- ASSESSMENT OF 2D-DIC STOCHASTIC PATTERNS
Antoš, J. - Nežerka, V., - Somr, M.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 1-10. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- Evaluation of glued laminated timber beams reinforced with carbon fiber fabric for use in FEM modelling
Klapálek, P. - Melzerová, L.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 231-234. ISBN 978-80-553-3167-6.
2017
- Microscopic Analysis of Interfacial Transition Zone of Cementitious Composites Prepared by Various Mixing Procedures
Bílý, P. - Fládr, J. - Němeček, J., - Koudelková, V.
In: 19. WASET Conference Proceedings. Waset.org: World Academy of Science, Engineering and Technology, 2017. p. 2259-2263. San Francisco USA. vol. 19(9)XVIII. ISSN 2010-376X.
2017
- A Comparison of Spectators Induced Grandstand Vibrations and Fans Behavior during Two Ice Hockey Games between the Same Teams in the Regular Season and in the Playoffs
Polák, M. - Plachý, T., - Verner, M.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 510-515. vol. 190. ISSN 1877-7058.
2017
- An Experimental Study Focused on Spectators' Behavior and Induced Vibrations of a Reinforced Concrete Grandstand on a Football Stadium
Plachý, T. - Polák, M., - Verner, M.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 2871-2876. vol. 199. ISSN 1877-7058.
2017
- Assessment of an Old Steel Railway Bridge Using Dynamic Tests
Plachý, T. - Polák, M., - Ryjáček, P.
In: Procedia Engineering. Oxford: Elsevier Ltd, 2017. p. 3053-3058. vol. 199. ISSN 1877-7058.
2017
- The in Situ Application of a New Approach to Experimental Estimation of Tensile Forces in Prestressed Structural Elements by Method Based on the Magnetoelastic Principle
Klier, T - Míčka, T - Polák, M. - Plachý, T. - Šimler, M, - Smeták, T
In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 122-132. ISBN 978-80-553-3167-6.
2017
- Probabilistic Approach to Damage of Tunnel Lining Due to Fire
Šejnoha, J. - Sýkora, J. - Novotná, E., - Šejnoha, M.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
2017
- Comparison of Fans' Behavior and Grandstand Dynamic Response During Two Hockey Matches Between the Same Teams
Verner, M. - Polák, M., - Plachý, T.
In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 607-610. ISBN 978-80-553-3167-6.
2017
- Comparison of the Fans´ Behaviour and the Induced Grandstand Vibrations on Two Different Football Stadia
Plachý, T. - Polák, M., - Verner, M.
In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
2017
- The Verification of a New Approach to the Experimental Estimation of Tensile Forces in Prestressed Structural Elements by Method Based on the Magnetoelastic Principle
Klier, T - Míčka, T - Plachý, T. - Polák, M. - Smeták, T, - Šimler, M
In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
2017
- Tvarová optimalizace dentálního implantátu pro zlepšení osteointegrace a mechanické únosnosti
Řehounek, L. - Denk, F., - Jíra, A.
In: Biomateriály a jejich povrchy X.. Praha: Czech Technical University in Prague, 2017. ISBN 978-80-01-06195-4.
2017
- Parallel modeling of hygrothermal performance of external wall made of highly perforated bricks
Maděra, J. - Kočí, J. - Kočí, V., - Kruis, J.
Advances in Engineering Software. 2017, 113 47-53. ISSN 0965-9978.
2017
- Micromechanical Analysis of Complex Structures by Nanoindentation
Hájková, P. - Jíra, A.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 60-65. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Numerical model of a 3D-printed titanium structure for use in implant dentistry
Řehounek, L. - Jíra, A., - Denk, F.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 21-26. ISBN 978-80-553-3167-6.
2017
- Sbírka příkladů stavební mechaniky
Jíra, A. - Jandeková, D. - Hlobilová, A. - Janouchová, E., - Zrůbek, L.
Praha: ČVUT, Fakulta stavební, Katedra mechaniky, 2017. 1. vol. 1. ISBN 978-80-01-06301-9.
2017
- Nanoindentace a její aplikace pro cementové materiály
Němeček, J. - Rymeš, J. - Koudelková, V., - Němeček, J.
In: Juniorstav 2017, 19. odborná konference doktorského studia. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2017. ISBN 978-80-214-5473-6.
2017
- An adaptive variational Quasicontinuum methodology for lattice networks with localized damage
Rokoš, O. - Peerlings, R. H. J. - Zeman, J., - Beex, L. A. A.
International Journal for Numerical Methods in Engineering. 2017, 112(2), 174-200. ISSN 0029-5981.
2017
- Наноиндентирование и его применение для определения микромеханического поведения бетона.
Němeček, J. - Němeček, J., - Khmurovska, Y.
In: Сборник научных трудов «Актуальные вопросы машиноведения». Выпуск 6. Объединенный институт машиностроения национальной академии наук Беларуси, 2017. p. 301-305. ISSN 2306-3084.
2017
- Nanoindentace a její aplikace pro cementové materiály
Němeček, J. - Rymeš, J. - Koudelková, V., - Němeček, J.
In: Juniorstav 2017, Sborník abstraktů. Brno: Vysoké učení technické v Brně, Fakulta stavební, 2017. pp. 75. ISBN 978-80-214-5462-0.
2017
- Different Approaches to Estimation of Variability in Properties of Heterogeneous Materials
Janouchová, E.
In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
2017
- Durability assessment of reinforced concrete structures due to chloride ingress up and beyond induction period
Šmilauer, V. - Hájková, K. - Jendele, L., - Červenka, J.
In: 39th IABSE Symposium. Zürich: IABSE c/o ETH Hönggerberg, 2017. p. 2488-2495. ISBN 978-3-85748-153-6.
2017
- Validation of CTU Prague thermo-mechanical simulator with TU Graz restraining frame experiments
Hájková, K. - Schlicke, D. - Turner, K. - Šmilauer, V., - Heinrich, P.
In: 2ND INTERNATIONAL RILEM/COST CONFERENCE ON EARLY AGE CRACKING AND SERVICEABILITY IN CEMENT-BASED MATERIALS AND STRUCTURES Volume 2. Cachan: RILEM Publications, 2017. p. 703-708. ISBN 978-2-35158-200-8.
2017
- MoleMOD: On design specification and applications of a self-reconfigurable constructional robotic system
Petrš, J. - Havelka, J. - Florián, M., - Novák, J.
In: ShoCK! Sharing of Computable Knowledge! Proceedings of the 35th International Conference on Education and Research in Computer Aided Architectural Design in Europe, 20th-22nd September 2017, Rome, Italy. Volume 1.. Řím: Sapienza University of Rome, 2017. p. 159-166. vol. 1. ISBN 9789491207129.
2017
- The calibration program for the hypoplastic sand model
Kadlíček, T. - Janda, T., - Šejnoha, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 430-433. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Influence of increasing amount of recycled concrete powder on mechanical properties of cement paste
Topič, J. - Prošek, Z., - Plachý, T.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
2017
- Utilization of the waste from the marble industry for application in transport infrastructure: mechanical properties of cement pastes
Prošek, Z. - Trejbal, J. - Topič, J. - Plachý, T., - Tesárek, P.
In: Building up Efficient and Sustainable Transport Infrastructure 2017 (BESTInfra2017). Bristol: IOP Publishing Ltd, 2017. IOP Conference Series: Materials Science and Engineering. vol. 236. ISSN 1757-8981.
2017
- Application of Boundary Inverse Methods in Civil Engineering
Havelka, J.
In: Parametric Uncertainty. Braunschweig: Technical University of Braunschweig, 2017.
2017
- Analysis of Experimental and Calculated Values of Shear Broken Cement Paste
Mužíková, B. - Padevět, P. - Bittnar, P., - Antoš, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 20-26. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Computational performance of a DSG-based isogeometric beam element
Dvořáková, E. - Patzák, B.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 290-293. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- MICROSCOPIC FEATURES OF CEMENT PASTE MODIFIED BY FINE PERLITE
Hrbek, V. - Koudelkova, V. - Padevět, P., - Sasek, P.
In: ExNum 2016. Praha: CESKE VYSOKE UCENI TECHNICKE V PRAZE, 2017. p. 12-16. vol. 7. ISSN 2336-5382. ISBN 978-80-01-06070-4.
2017
- Grid indentation and statistic deconvolution: Limitations and accuracy
Hrbek, V. - Koudelková, V.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 15-22. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Svetelná linka
Sivý, D. - Antoš, J.
[Technical and Art Work] - Prov. org. FEL ČVUT, Fak. elektrotechnická, Technická 2 166 27 Praha 6, dat. prov. - zač. 2017-07-01 ukonč. 2017-07-31.
2017
- Cyclic Temperature Loading: Residual Flexural Strength of Refractory Slabs
Holčapek, O. - Reiterman, P., - Konvalinka, P.
Acta Polytechnica. 2017, 57(2), 97-104. ISSN 1210-2709.
2017
- Water absorption properties of rammed earth material with montmorillonite clay
Mužíková, B. - Otcovská, T., - Padevět, P.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 398-401. ISBN 978-80-553-3167-6.
2017
- Usage of Illite-kaolinitic Clay for Rammed Earth Manufacturing and Its Drying Rate
Otcovská, T. - Mužíková, B., - Padevět, P.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 388-391. ISBN 978-80-553-3167-6.
2017
- Measurements of dynamic wind pressures on gable roofs - Comparison with ČSN en 1991-1-4
Pospíšil, S. - Macháček, M. - Hračov, S. - Kuznetsov, S., - Trush, A.
In: DYNAMICS OF CIVIL ENGINEERING AND TRANSPORT STRUCTURES AND WIND ENGINEERING (DYN-WIND'2017). Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2017. ISSN 2261-236X.
2017
- Computational aspects of RBFN meta-models for multi-objective RBDO formulation
Hlobilová, A. - Lepš, M.
In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
2017
- Parallelization of Reliability-based Design Optimization using Surrogates
Hlobilová, A. - Lepš, M.
In: Proceedings of the Fifth International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering. Stirling: Civil-Comp Press Ltd, 2017. p. 1-16. ISSN 1759-3433. ISBN 978-1-905088-66-9.
2017
- Stochastic Finite Element Method
Havelka, J.
[Software] 2017.
2017
- Výpočet kondenzace vodní páry v tunelech
Mračková, M. - Patzák, B. - Šmilauer, V., - Pruška, J.
Tunel. 2017, 26(3), 40-47. ISSN 1211-0728.
2017
- Příkopová tvarovka
Lidmila, M. - Lojda, V. - Nežerka, V., - Somr, M.
Czechia. Industrial Design CZ 37103. 2017-08-30.
2017
- MECHANICAL BEHAVIOR OF A TITANIUM ALLOY TRABECULAR STRUCTURE
Řehounek, L. - Jíra, A., - Denk, F.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 818-821. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Experimental and numerical analyses of a 3D-printed titanium trabecular dental implant
Řehounek, L. - Jíra, A.
Acta Polytechnica. 2017, 57(3), 218-228. ISSN 1805-2363.
2017
- Determination of fracture toughness of human enamel by nanoindentation based on energy release method
Hájková, P. - Jíra, A.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 15-20. ISBN 978-80-553-3167-6.
2017
- Comparation of mechanical responses of dental implants manufactured by 3D printing and machining
Jíra, A. - Denk, F.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 45-49. ISBN 978-80-553-3167-6.
2017
- Modular-Topology Optimization of Truss Structures Composed of Wang Tiles
Tyburec, M. - Zeman, J. - Doškář, M. - Lepš, M., - Novák, J.
[Invited unpublished scientific lecture] Copenhagen: 2017-06-23.
2017
- Properties and microstructure of cement paste including recycled concrete powder
Topič, J. - Prošek, Z.
Acta Polytechnica. 2017, 57(1), 49-57. ISSN 1210-2709.
2017
- Shrinkage of cement composite with material based on waste marble and limestone
Hlubocký, L. - Prošek, Z.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 80-85. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Hydration heat evolution of the cement paste with recycled concrete: Influence of grain size distribution of recycled concrete powder
Topič, J. - Prošek, Z.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 37-42. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Destructive Testing of cement paste with micronized waste marble powder as partial replacement for cement - Long time development of mechanical properties
Prošek, Z. - Topič, J., - Tesárek, P.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 451-454. ISBN 978-80-553-3167-6.
2017
- Influence of Different Admixtures on Hydration Process and Mechanical Properties of Cement Paste
Topič, J. - Prošek, Z. - Plachý, T., - Tesárek, P.
In: 55th Conference on Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 455-458. ISBN 978-80-553-3167-6.
2017
- Effect of Poly(vinyl-alcohol) amount on flexural strength of cement mortars with micronized recycled concrete
Tesárek, P. - Prošek, Z., - Fládr, J.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 509-512. ISBN 978-80-553-3167-6.
2017
- Interaction enhancement between recycled PET macro-fiber reinforcement and cement matrix via plasma treatment
Trejbal, J. - Prošek, Z. - Tesárek, P., - Dejdar, L.
In: Experimental Stress Analysis 2017. Košice: Technical University of Kosice, 2017. p. 577-580. ISBN 978-80-553-3167-6.
2017
- EFFECTIVE ELASTIC AND STRENGTH PROPERTIES OF UNIDIRECTIONAL FIBROUS CERAMIC COMPOSITES
Valentová, S. - Vorel, J., - Šejnoha, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 1010-1013. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Quasicontinuum method extended to irregular lattices
Mikeš, K. - Jirásek, M.
Computers and Structures. 2017, 192 50-70. ISSN 0045-7949.
2017
- A finite element perspective on nonlinear FFT-based micromechanical simulations
Zeman, J. - de Geus, T. W. J. - Vondřejc, J. - Peerlings, R. H. J., - Geers, M.G.D.
International Journal for Numerical Methods in Engineering. 2017, 111(10), 903-926. ISSN 0029-5981.
2017
- Modular-Topology Optimization of Truss Structures Composed of Wang Tiles
Tyburec, M. - Zeman, J., - Kučerová, A. opon.
Defense date 2017-02-09. Master Thesis. CTU FCE. Department of Mechanics; CTU FCE. Experimental Centre.
2017
- Non-invasive Inverse Problem in Civil Engineering
Havelka, J. - Sýkora, J., - Kučerová, A.
In: NMM 2017 - Nano & Macro Mechanics 2017. Praha: Czech Technical University in Prague, 2017. p. 43-48. Acta Polytechnica CTU Proceedings. vol. 13. ISSN 2336-5382. ISBN 978-80-01-06346-0.
2017
- ON EFFICIENCY OF QUASICONTINUUM SIMULATION OF CRACK PROPAGATION IN ELASTIC-BRITTLE DISORDERED LATTICES
Mikeš, K. - Jirásek, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 662-665. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Adaptive Quasicontinuum Simulation of Crack Propagation in Disordered Lattices
Mikeš, K. - Jirásek, M.
In: ISCAMI2017, Proceedings of the 18th International Student Conference on Applied Mathematics and Informatics. University of Ostrava, 2017. p. 33-34. ISBN 978-80-7464-921-9.
2017
- Shifting of LHS Design for Surrogate Modeling
Myšáková, E. - Lepš, M.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 690-693. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Identification of Variability in Heterogeneous Material Properties Based on Hierarchical Modelling
Janouchová, E. - Kučerová, A.
In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
2017
- Dvouplášťové ostění podzemních děl a způsob stanovení únosnosti tohoto ostění
Hořejší, J. - Mařík, L. - Pešková, Š. - Šmilauer, V. - Procházka, P. - Konvalinka, P. - Vogel, F., - Sovják, R.
Czechia. Patent CZ 306781. 2017-05-24.
2017
- Boundary Inverse for General Transport Model
Havelka, J.
[Software] 2017.
2017
- Calculation of nonlinearly deformed membrane shape of liquid lens caused by uniform pressure
Pokorný, P. - Šmejkal, F. - Kulmon, P. - Novák, P. - Novák, J. - Mikš, A. - Horák, M., - Jirásek, M.
Applied Optics. 2017, 56(21), 5939-5947. ISSN 1559-128X.
2017
- Role of Random Factors in Nonlinear Regression: a Case Study for Estimation of Thermophysical Parameters
Janouchová, E. - Kučerová, A., - Sýkora, J.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 410-413. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- EVALUATION OF THE APPLICATION OF A THERMAL INSULATION SYSTEM: IN-SITU COMPARISON OF SEASONAL AND DAILY CLIMATIC FLUCTUATIONS
Fořt, J. - Černý, R. - Konvalinka, P. - Pavlík, Z., - Beran, P.
Acta Polytechnica. 2017, 57(3), 159-166. ISSN 1210-2709.
2017
- Application of Boundary Inverse Methods in Civil Engineering
Havelka, J. - Sýkora, J. supervisor
Defense date 2017-02-23. Doctoral Minimum. CTU FCE. Department of Mechanics. Supervised by J. SÝKORA.
2017
- EFFECT OF AMBIENT CONDITIONS ON THE PROPERTIES OF CONCRETE CONTAINING WASTE MATERIALS AS PARTIAL PORTLAND CEMENT REPLACEMENT
Černý, R. - Čáchová, M. - Koňáková, D. - Vejmelková, E., - Konvalinka, P.
In: 17th International Multidisciplinary Scientific Geoconference SGEM 2017. Sofia: STEF92 Technology Ltd., 2017. p. 131-138. Nano, Bio, Green and Space - Technologies for a Sustainable Future, Issue 62. vol. 17. ISSN 1314-2704. ISBN 978-619-7408-13-3.
2017
- ENGINEERING PROPERTIES OF CONCRETE SUITABLE FOR CONSTRUCTING PHYSICAL BARRIERS IN RADIOACTIVE WASTE DISPOSAL FACILITIES
Vejmelková, E. - Koťátková, J. - Bezdička, P. - Konvalinka, P., - Černý, R.
In: 17th International Multidisciplinary Scientific Geoconference SGEM 2017. Sofia: STEF92 Technology Ltd., 2017. p. 147-154. Nano, Bio, Green and Space - Technologies for a Sustainable Future, Issue 62. vol. 17. ISSN 1314-2704. ISBN 978-619-7408-13-3.
2017
- Calderón's Inverse Problem in Civil Engineering
Havelka, J. - Sýkora, J., - Kučerová, A.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. p. 370-373. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Künzel Model and Boundary Inverse Problem
Havelka, J. - Sýkora, J., - Kučerová, A.
In: UNCECOMP 2017. Athens: Institute of Research and Development for Computational Meth. in Eng. Sci. ICMES, 2017.
2017
- Numerical solution of deformation of circular membrane of liquid lens under uniform hydrostatic pressure
Pokorný, P. - Šmejkal, F. - Kulmon, P. - Mikš, A. - Novák, J. - Novák, P. - Jirásek, M., - Horák, M.
In: Proceedings of SPIE: Modeling Aspects in Optical Metrology VI. Baltimore: SPIE, 2017. p. 1033016-1-1033016-8. vol. 10330. ISSN 0277-786X. ISBN 9781510611054.
2017
- IMPLEMENTATION OF 3D VOF TRACKING ALGORITHM BASED ON BINARY SPACE-PARTITIONING
Kolařík, F. - Patzák, B.
Acta Polytechnica. 2017, 57(2), 105-115. ISSN 1210-2709.
2017
- eXtended variational quasicontinuum methodology for lattice networks with damage and crack propagation
Rokoš, O. - Peerlings, R. H. J., - Zeman, J.
Computer Methods in Applied Mechanics and Engineering. 2017, 320 769-792. ISSN 0045-7825.
2017
- Coupled Simulation for Fire-Exposed Structures using CFD and Thermo-Mechanical Models
Šulc, S. - Šmilauer, V., - Wald, F.
In: Engineering Mechanics 2017 - Book of full texts. Brno: Brno University of Technology, 2017. ISSN 1805-8248. ISBN 978-80-214-5497-2.
2017
- Static response of double shell concrete lining with a spray-applied waterproofing membrane
Vogel, F. - Sovják, R., - Pešková, Š.
Tunnelling and Underground Space Technology. 2017, 68 106-112. ISSN 0886-7798.
2017
- Experimentální vyšetřování mechanické energie absorbované prvky z vysokohodnotného vlákny vyztuženého betonu
Konrád, P. - Sovják, R., - Kabele, P. opon.
Defense date 2017-02-14. Master Thesis. CTU FCE. Experimental Centre.
2017
- Finite-element modeling of magma chamber–host rock interactions prior to caldera collapse
Kabele, P. - Žák, J., - Somr, M.
Geophysical Journal International. 2017, 209(3), 1851-1865. ISSN 0956-540X.
2017
- Ocelový most v Mirošově s extrémně stlačenou stavební výškou - projekt, realizace a experiment
Ryjáček, P. - Stančík, V. - Polák, M. - Plachý, T., - Pokorný, M.
In: Sborník příspěvků 22. mezinárodní sympozium MOSTY/BRIDGES 2017. Brno: Sekurkon, 2017. p. 343-349. ISBN 978-80-86604-71-8.
2017
- Engineering microstructures of slag-blended cements and alkali-activated foams - experiments and modelling
Šmilauer, V. - Hlobil, M., - Hlaváček, P.
In: Proceedings of the 5th international slag valorization symposium. Katholieke University Leuven, 2017. p. 411-424. 1. vol. 1. ISBN 9789090302942.
2017
- Interface Enhancement Between Polymeric Macro Fibers and Cement Matrix by Plasma Treatment
Trejbal, J. - Šmilauer, V. - Kopecký, L. - Artemenko, A., - Potocký, Š.
In: NANOCON 2016 Conference Proceedings. Ostrava: TANGER, 2017. p. 368-373. ISBN 978-80-87294-71-0.
2017
- Carbon Microfibers Surface Changes Induced by Oxygen Plasma Treatment
Prošek, Z. - Tesárek, P. - Trejbal, J. - Holub, P. - Havrda, J., - Potocký, Š.
In: NANOCON 2016 Conference Proceedings. Ostrava: TANGER, 2017. p. 330-334. ISBN 978-80-87294-71-0.
2017
- Origin of reverse compositional and textural zoning in granite plutons by localized thermal overturn of stratified magma chambers
Trubač, J. - Janoušek, V. - Žák, J. - Somr, M. - Kabele, P. - Švancara, J. - Gerdes, A., - Žáčková, E.
Lithos. 2017, 277 315-336. ISSN 0024-4937.
2017
- Durability of Concrete with Fly Ash from the Dam Orlík after 55 Years
Zobal, O. - Reiterman, P. - Plachý, T., - Bittnar, Z.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 81-87. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Dependence of Tensile Bending Strength of Rammed Earth on Used Clay Composition and Amount of Mixture Water
Otcovská, T. - Padevět, P.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 48-53. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Early Stage Microstructure Development of Cement Paste Modified by Crystalline Admixture
Hrbek, V. - Koudelková, V., - Němeček, J.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 92-99. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Fracture Properties of Mg - Alloys Assessed with Nanoindentation
Němeček, J. - Hrbek, V. - Koudelková, V., - Hlaváček, P.
In: Metallography XVI. Curich: Trans Tech Publications, 2017. p. 257-262. Materials Science Forum. vol. 891. ISSN 0255-5476. ISBN 978-3-0357-1018-2.
2017
- Numerical aspects of microplane constitutive models for concrete
Huang, L. C. - Li, J. - Tue, N. V., - Němeček, J.
Applied Mathematical Modelling. 2017, 41 530-548. ISSN 0307-904X.
2017
- Nano-SiCp effects on the production, microstructural evolution and compressive properties of highly porous.Al/CaCO3 foam fabricated via continual annealing and roll-bonding process
Hosseini, S. M. - Habibolahzadeh, A. - Králík, V. - Petráňová, V., - Němeček, J.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2017, 680 157-167. ISSN 0921-5093.
2017
- Příkopová tvarovka z recyklovaného plastu
Lojda, V. - Lidmila, M. - Nežerka, V., - Somr, M.
Czechia. Industrial Design Application.
2017
- Příkopová tvarovka z recyklovaného plastu
Lidmila, M. - Lojda, V. - Somr, M., - Nežerka, V.
Czechia. Patent Application.
2017
- Příkopová tvarovka z recyklovaného plastu
Lojda, V. - Lidmila, M. - Nežerka, V., - Somr, M.
Czechia. Patent Application.
2017
- Odborná zpráva o postupu prací a dosažených výsledcích v oblasti dentálních implantátů
Jíra, A. - Denk, F. - Denk, F. - Goldmann, T., - Bodlák, D
[Research Report] Praha: CTU. Faculty of Civil Engineering, 2017. Report no. 4.
2017
- Dřík dentálního implantátu
Jíra, A. - Denk, F., - Denk, F.
Czechia. Utility Model CZ 30382. 2017-02-21.
2017
- Finite strain FFT-based non-linear solvers made simple
de Geus, T.W.J. - Vondřejc, J. - Zeman, J. - Peerlings, R.H.J., - Geers, M.G.D.
Computer Methods in Applied Mechanics and Engineering. 2017, 318 412-430. ISSN 0045-7825.
2017
- Time Depend Wettability Deterioration of Plasma Treated Polymeric Macro-Fibers
Trejbal, J. - Tesárek, P., - Potocký, Š.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 43-48. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Utilization of Plasma Treated Polymeric Macro-Fibers as Reinforcement in Concrete Constructions
Trejbal, J. - Fládr, J., - Kopecký, L.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. p. 70-75. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Odborná zpráva o postupu prací a dosažených výsledcích za rok 2016 (projekt TA04031603)
Šejnoha, M.
[Research Report] Praha: Technologická agentura ČR, 2017.
2017
- Ternary binder incorporating CFBC fly ash: microstructure evolution and micromechanical strength predictions
Šmilauer, V. - Hlaváček, P. - Šulc, R. - Škvára, F., - Snop, R.
In: EuroCoalAsh 2017. Brno: Brno University of Technology, 2017. p. 82-86. 1. vol. 1. ISBN 978-80-214-5469-9.
2017
- Navrhování betonových konstrukcí s využitím genetického algoritmu
Mádlová, J. - Štemberk, P., - Kruis, J. opon.
Praha: Defense date 2017-02-13. Master Thesis. CTU FCE. Department of Concrete and Masonry Structures.
2017
- Microstructural Analysis of Fly Ash-Based Stabilizer for Track Bed
Lojda, V. - Zikmund, T. - Sojka, K. - Kaiser, J. - Prošek, Z., - Lidmila, M.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 66-73. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- OCELOVÝ MOST V MIROŠOVĚ S EXTRÉMNĚ STLAČENOU STAVEBNÍ VÝŠKOU - PROJEKT, REALIZACE A EXPERIMENT
Ryjáček, P. - Stančík, V. - Polák, M. - Plachý, T., - Pokorný, M.
In: Železniční mosty a tunely 2017, sborník příspěvků. Praha: SUDOP Praha a.s., 2017. p. 125-133. ISBN 978-80-906789-0-3.
2017
- Experimentální činnosti při a po výstavbě mostu Oskar
Ryjáček, P. - Polák, M. - Litoš, J. - Stančík, V., - Rose, D.
In: Železniční mosty a tunely 2017, sborník příspěvků. Praha: SUDOP Praha a.s., 2017. p. 9-16. ISBN 978-80-906789-0-3.
2017
- The dependence of the shrinkage of the cement composite with fine ground recycled concrete on its microstructure
Hrůza, J. - Topič, J., - Prošek, Z.
In: Contemporary Materials and Technologies in Civil Engineering. Curich: Trans Tech Publications, 2017. p. 103-108. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Mechanical Properties of the Cement Paste with Fine Ground Recycled Concrete Depending on the Microstructure
Hrůza, J. - Topič, J., - Prošek, Z.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 22-27. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Comparing Nano And Macroindentation In Search Of Microfibril Angle In Spruce
Kucíková, L. - Vorel, J. - Hrbek, V. - Němeček, J., - Šejnoha, M.
The International Journal of Computational Methods and Experimental Measurements. 2017, 5(2), 135-143. ISSN 2046-0546.
2017
- Flexural and Compressive Strength of the Cement Paste with Recycled Concrete Powder
Topič, J. - Fládr, J., - Prošek, Z.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 65-69. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Quasicontinuum Method Combined with Anisotropic Microplane Model
Mikeš, K. - Jirásek, M.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 142-147. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- The Effect of Micronized Waste Marble Powder as Partial Replacement for Cement on Resulting Mechanical Properties of Cement Pastes
Prošek, Z. - Šeps, K., - Topič, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 54-58. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Experiments on Wall Panels with One-sided Board Sheathing for Timber Structures
Celler, J. - Dolejš, J., - Hlavatá, V.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 3-8. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Microfiber Angle and its Effect on Wood Cell Behavior
Hlavatá, V. - Kuklík, P. - Celler, J., - Vaněrek, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 88-96. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Locking Removal Techniques for the Isogeometric Formulation of Curved Beams
Dvořáková, E. - Patzák, B.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 109-114. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Evaluation of Different Approaches to Solution of the Direct Solution of Large, Sparse Systems of Linear Equations
Bošanský, M. - Patzák, B.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 97-101. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Advanced Materials Research
Bošanský, M. ed.
Curich: Trans Tech Publications, 2017.
2017
- Membrane Structures – Aspects of Form-Finding Process
Hüttner, M. - Fajman, P., - Máca, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 28-33. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Contemporary Materials and Technologies in Civil Engineering
Ryparová, P. ed. - Tesárek, P. ed.
Praha, 2016-06-15. Curich: Trans Tech Publications, 2017. 731. ISSN 1013-9826. ISBN 978-3-0357-1138-7.
2017
- Adaptive Boundaries of Wang Tiles for Heterogeneous Material Modelling
Šedlbauer, D.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 159-166. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Comparison of Semidefinite Solvers for Topology Optimization of Cantilever Trusses Subject to Fundamental Eigenvalue Constraint
Tyburec, M. - Zeman, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 172-177. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Synthesized Fields Fluctuations by Means of Wang Tiles and Local Tilings
Zrůbek, L. - Kučerová, A., - Novák, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 178-183. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Microstructure-Based Evolution Of Compressive Strength Of Blended Mortars: A Continuum Micromechanics Approach
Hlobil, M.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 121-127. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Galerkin-Eshelby Meshless Approach to Multiple Inclusion Problem
Šulc, S. - Novák, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 167-171. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Parameter Study on Subset Simulation for Reliability Assessment
Hlobilová, A. - Lepš, M.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 128-135. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Wang Tiling Based Enrichment Functions for Extended Finite Element Method
Doškář, M. - Novák, J., - Zeman, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 102-108. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Künzel Model and Boundary Inverse Problem
Havelka, J. - Sýkora, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 115-120. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Surrogate Based Evaluation of the Design of Experiments
Myšáková, E. - Lepš, M.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 148-152. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Bayesian Updating of Aleatory Uncertainties in Heterogeneous Materials
Janouchová, E. - Kučerová, A., - Sýkora, J.
In: Modern Methods of Experimental and Computational Investigations in Area of Construction II. Pfaffikon: Trans Tech Publications Inc., 2017. pp. 136-141. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Modern Methods of Experimental and Computational Investigations in Area of Construction II
Padevět, P. ed.
Praha, 2016-09-22. Pfaffikon: Trans Tech Publications Inc., 2017. Advanced Materials Research. ISSN 1022-6680. ISBN 978-3-0357-1092-2.
2017
- Micromechanics-based simulations of compressive and tensile testing on lime-based mortars
Nežerka, V. - Zeman, J., - Němeček, J.
Mechanics of Materials. 2017, 105 49-60. ISSN 0167-6636.
2017
- Relationship between Compressive Strength and Young´s Modulus of Cement Paste with Recycled Concrete Powder
Topič, J. - Trejbal, J. - Plachý, T., - Prošek, Z.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 254-259. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Mechanical Properties of Cement Composites Reinforced by Carbon Microfibers: Compressive and Bending Strength
Tesárek, P. - Holub, P. - Havrda, J. - Fládr, J. - Prošek, Z. - Trejbal, J., - Plachý, T.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 351-356. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Influence of Waste Crushed Limestone and Waste Micronized Marble Powder on Mechanical Properties of Cement Composite
Prošek, Z. - Topič, J. - Šeps, K., - Tesárek, P.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 222-227. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Effect of Microfillers on Selected Destructive and Nondestructive Mechanical Properties of Cement Mortars: Different Types of Recycled Materials
Plachý, T. - Tesárek, P. - Hlubocký, L. - Hrůza, J. - Trejbal, J., - Prošek, Z.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 195-200. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Estimation of thermophysical parameters revisited from the point of view of nonlinear regression with random parameters
Jarušková, D. - Kučerová, A.
International Journal of Heat and Mass Transfer. 2017, 106 135-141. ISSN 0017-9310.
2017
- Fiber Reinforced Fly Ash Concrete and Extreme Fires
Brouček, M. - Šejnoha, M., - Reiterman, P.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 12-17. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017
- Long-Term Development of Strength of Cement Paste with Fly Ash
Zobal, O. - Padevět, P.
In: Special Concrete and Composites 2016. Curich: Trans Tech Publications, 2017. p. 151-156. Key Engineering Materials. ISSN 1013-9826. ISBN 978-3-0357-1079-3.
2017